Snowmat system
- Antifreeze and snow protection heating mats for ramps and roads
- Mat made to measure to suit customer needs
- Delivery normally in 5 working days
- Constant power at any temperature
- Hot cable/cold cable connection with extrusion during manufacture
- Hot cable cannot be cut on site
Notes on operation:
- Heating mats suitable for embedding in concrete
- Asphalt model available upon request
- Very easy installation by an electrician during construction of garage or road access ramps
- Normally only wheelbases are protected but the entire surface is protected for manoeuvring areas
Examples of application:
- Snow and frost protection of access ramps to condominium garages, underground car parks of hospitals, shopping centres, towns
- SNow and frost protection of truck manoeuvring areas or municipal road surfaces
max CT temperature:
65°C
supply voltage:
230 V c.a.
Temperature classes:
Rated power of the heating cable 27W/m.
Rated power of the heating cable 28W/m.
The following models are available for asphalt finishes:
| Code | Model | Details |
| CP3311 | Customised SNOWMAT CP 837W | for ramp wheelbases from 5 to 7 m long |
| CP3312 | Customised SNOWMAT CP 1068W | for ramp wheelbases from 7 to 8.5 m long |
| CP3313 | Customised SNOWMAT CP 1350W | for ramp wheelbases from 8.5 to 11 m long |
| CP3314 | Customised SNOWMAT CP 1647W | for ramp wheelbases from 10.5 to 13 m long |
| CP3315 | Customised SNOWMAT CP 1900W | for ramp wheelbases from 12.5 to 15 m long |
| CP3316 | Customised SNOWMAT CP 2430W | for ramp wheelbases from 16 to 20 m long |
| CP3318 | Customised SNOWMAT CP 3400W | for ramp wheelbases from 21 to 28 m long |
| Code | Model | Details |
| CN1501 | Customised SNOWMAT/ASF 640W | for ramp wheelbases from 4 to 5 m long |
| CN1502 | Customised SNOWMAT/ASF 890W | for ramp wheelbases from 5.5 to 7 m long |
| CN1503 | Customised SNOWMAT/ASF 1270W | for ramp wheelbases from 8 to 10.5 m long |
| CN1504 | Customised SNOWMAT/ASF 1900W | for ramp wheelbases from 12 to 15 m long |
| CN1505 | Customised SNOWMAT/ASF 2700W | for ramp wheelbases from 16 to 21 m long |
| CN1506 | Customised SNOWMAT/ASF 3400W | for ramp wheelbases from 21 to 28 m long |
Linear circuits can also be supplied instead of ready-assembled mat circuits. Details can be found in the product datasheet.
Normally the SNOWMAT system is supplied with a humidity and temperature sensor and a control unit (or control panel, customer’s choice).
The SNOWMAT system consists of a mat made from heating circuits with the connection between the heating cable and 7 m of power cable made directly in the factory and extruded in-line. The width of the mat is approximately 50 cm and the length defined according to customer requirements. It is easy to install and does not require any cable boxes or terminations on site but only the normal connections in the power box.
Two versions are available:
SNOWMAT/CP
For installation in concrete, sand or other finishes but NOT directly in asphalt. These mats are manufactured with heating circuits having the following characteristics:
- Two copper alloy conductors.
- One earth wire.
- XLPE insulation with high mechanical strength and water-tightness.
- Complete with aluminium screen for mechanical protection.
- Diameter 7 mm.
- Maximum tolerance temperature 65°C.
- Power supply voltage 230 V ac
- Rated power of the heating cable 27W/m.
- Tolerance on the power +/-10%.
- Direct cold cable/hot cable connection in line without cable boxes, indicated on the cable.
- 1mm2 cold cable, length 7 metres.
SNOWMAT/ASF
For direct installation in asphalt. These mats are manufactured with heating circuits having the following characteristics
- Two copper alloy conductors.
- One earth wire.
- XLPE insulation with high mechanical strength and water-tightness.
- Complete with aluminium screen for mechanical protection.
- Diameter 7.5 mm.
- Maximum tolerance temperature with cable powered 65°C.
- Maximum tolerance temperature for manual covering in asphalt. 160°C.
- Power supply voltage 230 V ac
- Rated power of the heating cable 28W/m.
- Tolerance on the power +/-10%.
- Direct cold cable/hot cable connection in line without cable boxes, indicated on the cable.
- 1mm2 cold cable, length 10 metres.
Certifications
Request an Online Quote now
For more information on our products and areas of application, please do not hesitate to contact us, we will provide you with all the details you need.